Products

Product No. MI-240469 @ 5 Liter

Specially formulated for hot process of tire repairing and vulcanizing therefore can be used at curing temperature at least 100’C or 212’F.
For the best result, drying time 20 minutes, store in cool and dry storage below 23 degree Celsius, pay attention to expired date

Anti separation cement, proven better …, it will hold your patch & stick together, even when running on extreme operations

Product No. # MI – 240481

Tire Friend is formulated normal for tire and also as a rim conditioner, it will protect your rim of extreme corrosion, it makes easier to demount tire assembly even it run for long mileages, its running cooler caused of free of corrosion. Decrease down time no delay because of tire assembly was stuck. Decrease air lost, prolong tire life and be a rim or tire leaking detector.

Product No. TB – 240473 (Hot Process)
Product No. TB – 240474 (Cold Process)

Uncured Cushion gum for lamination of any repair patches, and for best result of repairing use it also to laminate all skived surface area before filling with extruder rubber compound, compatible with any black solution.
@ 12 kg /roll, can be ordered any (1mm, 2mm or 3mm) x 12 inches, customized. Available for hot process and cold process.

Product No. # MI – 240470 Master Gauge
Product No. # MI – 240471 Tire Gauge

Master Gauge – Spec: 0 – 160 psi, glow in the dark face
Tire Gauge – Spec: 0 – 160 psi, glow in the dark face, with rubber protector

Accurate with glycerin, Last longer, can be read even in dark and low visible area.

Product No. # MI – 240497

MTT features a rich set of reports and on screen queries that can be used to analyze the performance of tires and rims belonging to a vehicle fleet. MTT features comprehensive rim tracking, which along with tracking performance can also assist the customer to manage rims safely and effectively.

MTT will provide extensive REPORTS as to the:
• Total hours, distance and tones tire and rims are achieving
• Wear rates by tire brand, size, type, vehicle, and position
• Cost per hour, distance or tones
• Location and status of all tires and rims (including those away for repair or recapping)
• Deliveries of tires and rims
• Air pressure record and action plan with alert system
• Status of rim tests and inspections
• Failure reasons, lost tread value
• Expected tire usage
• Life time of tires after and before repairing and compare between repairer
• Warranty claims
• Complete detailed history or tires and rims

PATCHES ARE CENTERED OVER THE DAMAGE, SO SAME PATCH DESIGN IS USED BOTH IN TREAD AND SIDE WALL

Multitama is patches maker, we are able to produce
custom dimension according to your needs. Mostly to save a tire we must do some tricks such as bigger patch and quite stronger enforcement to avoid deformation surface when tire airing up, to anchor the patch we have to place them on non-flex to non-flex point. The way to do so you must get custom dimension & structure of the patches itself.

Product No. TB – 240472

Uncured rubber compound for filling skives in all area on the tire. Good vulcanizing and good flowing. Provide excellent adhesion and high resistance to dynamic stress.

Product No. TB – 240468

MODEL M200
MVM is designed for efficient in tire repairing business. This machine is able to vulcanize 2 (two) pieces of any tire size at once, saving capital cost buy M200 instead buying two of other brands.
Spec:
Electrical 220 V 50hz~60hz

HEAT PADS/ TIRE HEATERS

Multitama is a heat pad maker, our product is high quality, long life and
Generate heat constantly and distribute heat on all of surfaces with same
Temperatures which is guaranty your tire in perfect curing.

Suit for tire vulcanizing, High quality, high durability, excellent flexibility and wear out resistant

This harness is used for securing, airbag & heat pad during curing time

MI-SPAN-4
Suit for tire size 15.5R25 up to 25.5R25

MI-SPAN-6
Suit for tire size 26.5R25 up to 27.00R49
This is conventional model a machine is useable only for one tire

MI-SPAN-8
Suit for tire size 33.00R51 up to 55/80R63

Product No. MI – 240496

Suitable for heavy equipment wheels, usually is used to secure lock ring to avoid movement on wheels & Rims component.

A Surelock (also known as Shur-Lok) bead seat band is a safety feature on earthmover rims designed to prevent dangerous rim disassembly during inflation or deflation. It works by mechanically interfering with the lock ring, ensuring it stays properly seated and preventing the tire from separating from the rim, even if the lock ring is incorrectly installed.